AirTies CTO answers all your WiFi questions

If you didn’t know, you can create a home network using your home’s power cables. If you knew that, you may not know that this technology could potentially interfere with radio-based devices. And even worse, your neighbours’ systems could affect you, too.

Power Line Transmitters came about in the early 21st century, allowing you to plug-in an adapter to your wall that would then use your power cables to transfer network data. This was fine, until a demand for faster speeds led developers into the Very High Frequency (VHF). Using this bandwidth meant that data could be sent at higher speeds. However, it also led to some serious problems – radio noise.

AirTies-interview

“When signals travel on any conductor, they also radiate into the air depending on how good of an antenna that conductor is acting as,” explains Metin Ismail Taskin, Chief Technical Operator at AirTies Wireless Networks. “Today, most of the power line adaptors operate from 2 to 30 MHz – the new ones even operate up to 50 MHz. A good antenna for 30 MHz is a piece of wire that is multiple of 5m long. You can easily find that length of power cable in the home.”

“This means that the signal injected onto a home’s mains wiring will easily radiate into the air. And that can interfere with any receivers that are trying to detect very weak radio signals at the same frequency.”

This is bad news, because the HF and VHF noise these systems create includes FM and DAB radio, as well as most amateur radios, emergency alert systems in some parts of the world and nearby telephone lines carring the ADSL2+ service. And it could get worse.

“More devices mean more interference. I think this problem will worsen as more and more people start using PLAs and inject signals into power wiring in the same neighborhood. Can you imagine a 50 – 100 home hi-rise building where 50% of the apartments have at least one pair of PLA? The signals that get injected into each apartment’s electric wiring will travel to the backbone power distribution network of the whole building and add on top of each other to create a big radiator.”

So is there a solution for the power-line networking problem, or is it a technology doomed to failure? “PLAs are operating in a band that nobody thought signal would be put onto intentionally. Therefore the consequences of operating at the frequency of PLAs are not very well known, since there are not many controlled experiments done yet.”

One recent one, conducted by the BBC, suggested that PLAs could have a massive affect on FM and DAB radio signal, should the household be within signal range, but not close to the transmitter. “New standards are trying address the interference issue, but I am not sure if it will be ever possible to solve it completely.”

So why don’t we see this problem with Wifi? “Wifi has dedicated frequency bands where it is allowed to radiate certain amount of signal as long as it stays within the standards. The bands were selected based on the fact that there will be intentional radiators.”

“Wifi operates at 2.4 or 5 GHz, where the interference sources are well known. 2.4 GHz band is very much occupied with other Wifi equipment, including bluetooth devices and microwave ovens. It is not easy to avoid interference there.”

“The 5 GHz band has a lot more channels and there are not may devices operating in this band. AirTies Wifi equipment can operate in 2.4 or 5 GHz, although the 5 GHz should be preferred to avoid interference. While AirTies wireless devices operate, they continuously monitor the interference at its own and other channels within the 5GHz band. If the devices see too much interference inside the channel they are using, they automatically switch to another channel that has less noise and interference. ”

AirTies: Dry your hair, cook dinner – and still enjoy a wireless connection

Connected TVs are big news nowadays – with the ability to download videos and catchup TV direct to your TV set, they sound like the perfect multimedia solution. But because our homes are so full of gadgetry (maybe some more than others!) there’s an added problem.

Wireless connections can be at the mercy of signals from other gadgetry such as microwaves and hair dryers, which means that your connection can prove jittery and suffer from lag.

AirTies-unit

Step in the good folk at AirTies, who have taken pity on us techno geeks by coming up with Air 4420, a solution that connects hybrid and IPTVs and Ethernet-enabled TVs and players wirelessly to your home network and the internet – and they promise it can all happen with one-touch self-service installation.

The Air 4420 wireless devices are installed in pairs. One is connected to the IP Gateway while the other connects to the IPTV set top-box or the Ethernet port of a network-enabled TV or player. Next, says AirTies, you simply press a button to wirelessly connect the TV or the player to the net or your home network. If you have several TVs, wireless repeaters can be added to extend the wireless range.

Because Air 4420 operates at 5GHz frequency, it offers 22 channels for interference-free, high-speed 300Mbps wireless networking, so you can watch High Definition video, listen to music or view photos at high speeds.

Add an external USB disk drive and you have a UPnP AV compatible media server which will allow video, music and photos to be displayed on UPnP AV compatible TVs and players.

For more details log on to www.airties.com